Canon Pixma Pro 200S has used a total of eight ink cartridges, which have been added to a brown color, light gray, photo -cyan, and photo -magneta cartridge in the usual consumes, mergetta, yellow and black cartridges. Posted black cartridge production only applies to black ink cartridge because printer uses only gray and light gray ink for half tones while photographing. A separate output test shows that brown and light brown cartridges run longer, which contain 303 pages before any visible signs of fading, so you will not need to replace them like other cartridges. The printer warns you and stops the print job when the ink levels are low, but you can continue to print ‘okay’ and continue to print.
As its predecessor, Canon Pixma Pro 200, it uses numerous ink to produce printer, manjita and yellow primary. Replace The intensity of the color Sorting from ‘automatic’ to ‘manual’, it subdue this behavior, but as a result, significant production of the page is significantly reduced. The used connection also has a problem, as the production of Wi-Fi using the wired USB connection increases the production significantly. Published colorful page output showed the number of pages obtained using wired connection The intensity of the color Set to ‘automatic’. It is worth noting that the color page production Canon Pixma Pro 200 is still much less than 200, though it is difficult to say whether it is related to the above mentioned issues here. If Canon moves the firmware update to solve this, we will update this review.
